Home  Manuals  2B (2.2 Beta)  Advanced Settings  Tickle Level

Tickle Level

WARNING THIS IS A BETA RELEASE MANUAL NOT FOR 2.106 FIRMWARE

The Tickle mode has an adjustable sensitivity allowing you to control the output in Tickle mode from a tickle to a more pronounced sensation. Soft is normal, increased sensitivity is available from Soft, Low, Medium and High. Higher levels will feel more intense.

To Change the Tickle Level

Press the Select Button. on the front of your 2B. This will take you into the mode select option system. The inital mode show will depend on what mode you where in before pressing the Select Button.

Pulse Mode Select

Now rotate the central Adjust Knob clockwise until you can see the 'Tickle Level' Option on the LCD screen.

Tickle Level Mode Select

Press the Select Button. The exact tickle level shown on initial entry into the tickle level selection is set by what ever was last set (It is one of the values that are retained when the 2B is switched off).

Tickle Level Soft

By rotating the Adjust Knob you can cycle between the different tickle levels. Soft is the lowest level, High is the highest.

Tickle Level Low

 

Tickle Level Med

 

Tickle Level High

 

Once you have chose the level you require, press the Select button to engage the level. The 2B will now jump back to the mode select screen,

Tickle Mode Select

with Tickle Mode pre chosen. Now press the Select Button again to choose Tickle mode, or rotate the Adjust Control to choose another mode.