Program Modes - Bounce Mode

• 

Bounce mode is so named because the outputs ‘bounce’ from channel to channel. The outputs pulse alternately. The adjustment control allows the user to adjust the pulse rate from 1 to 99. Higher numbers indicate a faster pulse rate.  As with the pulse mode the second value on the display, is the pulse feel, this allows you to adjust the sensation of each individual pulse, from soft to spiky, with values from 1 to 99.

Channel A is on when channel B is off and visa versa.

Selecting Bounce Mode

To select the Bounce Mode, press the Select Button once and rotate the Adjust Control to select the Bounce mode.

Now press the Select Button to choose the currently displayed mode.

The screen shows the mode on the top line, then the Bounce Speed and Bounce Pulse Feel (50:50), on the bottom line the Channel A Level, Output Power Setting, Battery Level and Channel B Level.

Changing Values

To change the Bounce rate rotate the Adjust Control. You should see the first number on the top right of the screen change. Lower values indicate slower bounces. To change the Bounce Pulse Feel press and hold the Select Button while rotating the Adjust Control and you should see the second value on the top right of the screen change. Output levels are control by the Channel Level controls.

Bounce Range

The Pulse Rate is from around 1 second to 0.02 seconds.