Pulse Mode

Category: Program Modes

WARNING THIS IS A BETA RELEASE MANUAL NOT FOR 2.106 FIRMWARE

In Pulse Mode both of the outputs pulse on and off together with equal on and off times. The Adjustment Control allows the user to adjust the pulse rate (how quickly they pulse on and off) and is adjustable from 1 (slow) to 99 (fast). Higher numbers indicate a faster repetition rate. The second value on the display, is the pulse feel, allowing you to adjust the sensation of each individual pulse, from soft to spiky, with values from 1 to 99. The amount of time the pulse is on is equal to the amount of time off.

 

Selecting Pulse Mode

To select the Pulse Mode, press the Select Button once and rotate the Adjust Control to select the mode

Pulse Mode Select

 

Now press the Select Button to choose the currently displayed mode.

Pulse Mode

 

The screen shows the mode on the top line, then the Pulse Speed and Pulse Feel (50:50), on the bottom line the Channel A Level, Output Map, Output Power Setting, Battery Level and Channel B Level.

 

Changing Values

To change the Pulse rate rotate the Adjust Control. You should see the first number on the top right of the screen change. Lower values indicate slower pulses. To change the Pulse Feel press and hold the Select Button while rotating the Adjust Control and you should see the second value on the top right of the screen change. The Pulse Range is also effected by the use of the TimeWarp function. Output levels are control by the Channel Level controls.

 

Pulse Range

The Pulse Rate is from around 1 second to 0.02 seconds with Time Warp set to x1, increasing to around 35 seconds to 0.5 seconds with Time Warp set to x32