E-Stim Systems fully insertable Electro Egg. Given sufficient care your E-Stim Systems Electro Egg should last for years, and is covered by our Lifetime Guarantee.*
Designed For Your Pleasure
Our Electro Eggs are a Bipolar insertable electrode and so are designed with both of the contact points needed for electroplay in the same insertable along with a strengthened ‘tail’ to aid removal. The Electro Egg is suitable for both vaginal or anal use.
To Use
Before use, coat the Electro Egg with a thin layer of conductive gel and then gently insert. The Electro Egg is designed to be fully inserted with only the cable remaining visible. The current with then flow between both halves of the Electro Egg, stimulating the areas in-between.
Once inserted, ensure the powerbox is switched off and the output level control is at minimum, then insert the 3.5mm jack plug on the Electro Egg’s cable into the socket on your powerbox. Switch the powerbox on and slowly increase the output level to provide the desired stimulation.
Note:E-Stim electrodes cannot be used with a condom.
Safety Warning
DO NOT CONNECT ANY ELECTRICAL DEVICE TO ANY LOCATION ABOVE THE WAIST (ACROSS THE ARMS COUNTS AS ABOVE THE WAIST!), BUT ESPECIALLY DO NOT CONNECT ACROSS THE HEART, CHEST, NECK OR HEAD. DO NOT USE IF FITTED WITH A PACEMAKER OR ARE PREGNANT. REMEMBER YOU USE THIS DEVICE AT YOUR OWN RISK. YOU MUST READ AND UNDERSTAND THE USER MANUAL AND ALL OTHER INSTRUCTIONS BEFORE ATTEMPTING OPERATION.
Cleaning
Always clean your Electro Egg both before and after use and make sure it is completely dry before storage.
Soap, hot water and medical grade cleaning wipes or sex toy cleaner can be used to clean your Electro Egg. Do NOT use caustic cleaning substances as this may damage the Electro Egg.
The Electro Egg is NOT designed to be disassembled or to be immersed in liquid for cleaning. < /p>
Connection
The Electro Egg is designed with a captive cable with a 3.5mm jack plug on the end which will plug into any or our powerboxes or any other unit using a standard 3.5mm jack socket.
To remove
Reduce the output levels to minimum, switch off the powerbox and then unplug the cable from the powerbox. Gently pull on the strengthened ‘tail’ whilst relaxing your muscles and the Electro Egg will come out easily.
Once the Electro Egg has been removed, clean immediately as previously described and ensure the Electro Egg is completely dry before storage.
Do not remove the cable from the powerbox whilst in operation as inadvertent electric shocks may be experienced.
Lifetime Guarantee
*The Lifetime Guarantee covers the Electro Egg itself and not the cable, which is subject to our standard 3 month guarantee. Should it fail please contact us directly for advice.
