Program Modes - Throb Mode

• 

A continuous mode with the pulse feel cycling between two values. Nice and relaxing. Adjustments values are between 1 and 99.

To Select Throb Mode

To select the Throb Mode, press the Select Button once and rotate the Adjust Control to select the mode

Now press the Select Button to choose the currently displayed mode.

The screen shows the mode on the top line, then the Feel Adjustment Value. On the bottom line the Channel A Level,  Output Power Setting, Battery Level and Channel B Level is shown.

Changing Values

In Throb mode the pulse feel rises from soft to Hard producing what feels to many as a squeezing or 'kneeding' action. Both Channel A and Channel B 'Throb' at the same rate.

 To Change the range of squeeze, use the Adjust Control.

The Adjust Control on its own controls the lower limit of the cycle. Pressing and holding the Select Button and rotating the Adjust Control will control the upper limit of the cycle. If you attempt to increase the lower limit beyond the higher limit then the upper limit will automatically change, as will the lower limit if you attempt to change the upper limit below the lower limit.