Program Modes - Throb Mode
A continuous mode with the pulse feel cycling between two values. Nice and relaxing. Adjustments values are between 10 and 99.
To Select Throb Mode
To select the Throb Mode, press the Select Button once and rotate the Adjust Control to select the mode
Now press the Select Button to choose the currently displayed mode.
The screen shows the mode on the top line, then the Feel Adjustment Value. On the bottom line the Channel A Level, Output Power Setting, Battery Level and Channel B Level is shown.
Changing Values
In Throb mode the pulse feel rises from soft to Hard producing what feels to many as a squeezing or 'kneading' action. Both Channel A and Channel B 'Throb' at the same rate.
To Change the range of squeeze, use the Adjust Control.
The Adjust Control will control the upper limit of the cycle i.e the hard end of the cycle, so the cycle will run from 10 to the limit set. If you attempt to reduce the upper limit below 10 then it will be set to 10.