Flo Mode

• 

WARNING THIS IS A BETA RELEASE MANUAL NOT FOR 2.106 FIRMWARE

In Flo Mode both of the outputs are active. The Adjustment Control allows the user to adjust the sensation of each of the individual channel outputs, from soft to spiky, with values from 1 to 99. Rotating the Adjust Control on its own controls the feel value for Channel A, pressing the Select Button and rotating the Adjust Control changes the feel value for Channel B.

Selecting Flo Mode

To select the Flo  Mode, press the Select Button once and rotate the Adjust Control to select the mode

Now press the Select Button to choose the currently displayed mode.

The screen shows the mode on the top line, then the Channel A and Channel B Feel (50:50). On the bottom line is shown the Channel A Level, Output Map, Output Power Setting, Battery Level and Channel B Level.

Changing Values

To change the Feel for channel A rotate the Adjust Control, to change the Feel for Channel B, press and hold the Select Button AND rotate the Adjust Control.  You should see the numbers on the top right of the screen change. the first value is the feel for Channel A, the second value after the ':' is the feel value for Channel B.

Output levels are control by the Channel Level controls.