Join Controls

Joining Controls (A+B Mode)

When you first switch your 2B unit on, both the Channel A and Channel B controls are independent. However If you select the join mode (A+B) then the two controls become linked, giving you effectively one handed operation.

When you turn the Channel A control up, the Channel B value will also rise, if you turn it down, the Channel B channel will reduce as well. If you adjust the Channel B control when the join mode is active, then you can adjust the relative levels of each channel.

To Join or unjoin the Controls

Press the Select Button. on the front of your 2B. This will take you into the mode select option system.

Now Rotate the Adjust Control until you see 20 A&B Chan Link

 Press the Select Button,

now rotate the Adjust Control until you see either On

or Off

Now press the Select Button to select the your chosen join status.

You can see the current join status from the display. If join is active a '>' will be shown to show the current master control, in this case Channel A.

Updates

The E-Stim Systems 2B contains on board programs, the 'Firmware', that can be updated by the user. To do so you will need a PC or Mac computer running Windows or MacOS, and a Digital Link Interface system, available from E-Stim Systems. The software required to perform the update 'UpLink' is only available as part of the Digital Link Interface.

Where to Buy

Digital Link Pack (UK/ Europe)

Digital Link Pack (US / Rest of the World)

Or any good stockist of E-Stim Systems Products.

To switch the 2B into Bootloader Mode, remove ALL cables from the 2B, press and hold the Select switch and then turn your 2B on. The display should now show a 'B'. This is the bootloader mode.

 For more details on how to use UpLink, and the bootloader system to update your 2B, visit https://e-stim.info/uplink

Computer Control

For more details on how to control your E-Stim Systems 2B from a computer visit https://e-stim.info/commander

E-Stim Commander allows control via a PC, as well as the ability to record and playback 'sessions' from your PC or Mac.

Internet Control

It is possible to control the E-Stim Systems 2B over the internet with the optional Digital Link Interface. For more details of the Systems see our E-Stim Connect pages at https://e-stim.online.

E-Stim Connect is a secure and simple to use web browser based interface. Because it is web based, it is useable from any modern computer or mobile device with an internet browser and internet access.

Cleaning & Storage

Do not use solvents to clean your 2B. A gentle wipe with a soft cloth is all that is needed. It is not possible to sterilise the control unit.

In the event your 2B is not going to be used for long periods of time it is recommended you remove the battery.

About Us

E-Stim Systems is a multi award winning company and we have been creating dedicated Erotic Electro Stimulation systems since 2004.

We don't make anything else and with a wide range of designs, we are considered by many to be the experts when it comes to erotic electro play. We ship around the world, from two webstores (https://www.e-stim.co.uk for UK and the EU, https://www.e-stimsystems.com for the US, Canada, Australia and the rest of the world.) We also have an active user support forum at https://www.e-stim.net and a growing YouTube Channel https://www.youtube.com/estimsystems

Quality for Life

All of our Premium electrodes and Power units are designed and manufactured in the UK and come with a lifetime guarantee.

Regulations

US Regulatory Wireless Notice

This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by E-Stim Systems Ltd may void the users authority to operate the equipment.

European Union Notice

Products bearing the UKCA and CE marking comply with the EMC Directive (2014/30/EU), and the Low voltage Directive (2014/35/EU) issued by the Commission of the European Community.

This device may be used in the UK and all European Union Countries.

Type BF outputs

Copyright Notice

All images and text within this manual are ©E-Stim Systems Ltd 2007-2023

EBox™, EBox 2B™, 2B™, Uplink™, Commander3™ Commander4™, E-Stim Connect™ and derivative terms are trademarks of E-Stim Systems Ltd.

All rights reserved. E & OE.