External Power
Category: Getting Started
WARNING THIS IS A BETA RELEASE MANUAL NOT FOR 2.106 FIRMWARE
It is possible to use an external power supply with the 2B, but because of the isolation and safety issues when connecting to the mains we strongly recommend you only use an E-Stim Systems supplied universal power supply. The plug socket is beside the on off switch.
Always ensure that when you connect the external power unit, the 2B is switched off.
Insert the plug into the socket, switch the mains power on, then switch the 2B on. The display should light up as if batteries were fitted.
Use of the power supply will offer around a 30% Power increase.
When the power supply is connected, the Display will no longer show a battery symbol, as the 2B is no longer running off Battery.
