Starting to Play

WARNING THIS IS A BETA RELEASE MANUAL NOT FOR 2.106 FIRMWARE

Step 1

Read this manual and familiarise yourself with the controls.

Step 2

Step 3

Turn the 2B on. (The power slide switch can be found on the bottom of the control unit). The display should light up and the 2B will go through its self test. You should now see a screen like this

Pulse Mode

Now turn the 2B off. If for some reason you see a different display, then you can perform a Factory Reset to get everything back to the default state.

Step 4

Choose electrodes. The 2B is supplied with a simple set of Sticky pad electrodes and 2mm cables to get you started, but we do offer an ever increasing range of E-Stim Electrodes and accessories. See https://www.e-stim.co.uk and https://www.e-stimsystems.com for more details.

Step 5

Connect things up. Always ensure the 2B is switched off when connecting or disconnecting electrodes.

Step 6 and 7 and 8 .......

Turn the 2B back on

Now you can start experimenting with the modes