Home  Manuals  Ring Racks

Ring Racks

Category: Manuals

E-Stim Systems Ring Rack – User Guide

What is it?

The E-Stim Systems Ring Rack lets you connect multiple rings or Conductive Rubber Loops (with an adaptor) so they can be held and used all at the same time.
It comes in 4, 6, or 8 slot versions and has optional clip-in loop adaptors and even clip in 'teeth' if you want something with a little more bite.

Use it to stack up to eight contacts for creative multi-channel cock play.

Before You Start

  • Make sure your power box is off.
  • Gather your rings or loops and cables.

Setting It Up

  1. Choose the number of slots you need.
  2. Push each ring into a slot, line us the socket on the side, and the push a 4mm plug into the side hole and the ring. This should; d hold the ring securely

If you are planning to use conductive rubber loops, clip the loop adaptor in from the underside until it clips in, then threat the conductive rubber loop through and tighten with the loop lock on the top. The Clip in loop adaptors can work with both our 4mm and 2mm Loops.

You can use fewer than the total number of slots if you prefer.

Remember: at least two contact points are needed for current flow.

 

Connecting to Power

  • Make sure your powerboat is TUIRNED OFF and the outputs set to ZERO
  • Plug the Ring Rack leads into your e-stim power unit.
  • Check that connections are tight and cables are safe.

Using the Ring Rack

  • Position it as part of your setup.
  • Turn your power unit on at the lowest setting.
  • Increase slowly until you reach the desired level.
  • Check comfort and stop immediately if you feel pain or burning. Using conductive gel will help to reduce hotspots.
  • Limit session times to what feels comfortable.

Cleaning and Care

  • The Ring Rack is Made from 3D-printed biocompatible TPU. The Loop adaptors and Teeth are made from PLA.

  • Wash with mild soap and warm water or use an approved toy cleaner.

  • Do not boil, autoclave, or use alcohol or solvents.

  • Dry fully before storing.

  • Inspect before every use for cracks or damage.

Safety

  • Always have two or more contact points connected.
  • Never use near water or with people who have pacemakers.
  • Stop use immediately if you feel discomfort or abnormal sensation.

Storage

  • Unplug from your power unit.

  • Remove the rings, unclip the adaptors and teeth. Clean and dry the Ring Rack.

  • Store it in a cool, dry place away from sharp objects or direct sunlight.

Troubleshooting

No sensation:
Check that at least two contacts are connected and cables are secure.

Uneven feeling:
Adjust spacing or check for dry skin and poor contact.

Visible damage:
Stop using and replace the damaged component.

Product Details

  • Material: Biocompatible TPU
  • Sizes: 4, 6, or 8 slot
  • Colours: Red, Black, Yellow, Green, Blue
  • Compatible with E-Stim Systems power units and electrode rings

For support or replacement parts, visit estim.store.