Thrust Mode
WARNING THIS IS A BETA RELEASE MANUAL NOT FOR 2.106 FIRMWARE
Similar to Throb, Thrust is a continuous mode. with the pulse feel cycling between 10 and the adjustment value and then back to 0. Adjustments values are between 10 and 100.
To Select Thrust Mode
To select the Thrust Mode, press the Select Button once and rotate the Adjust Control to select the mode
Now press the Select Button to choose the currently displayed mode.
The screen shows the mode on the top line, then the Feel Adjustment Value. On the bottom line the Channel A Level, Output Map, Output Power Setting, Battery Level and Channel B Level is shown.
Changing Values
In Thrust mode the pulse speed rises from slow to fast??? producing what feels to many as a squeezing action. Both Channel A and Channel B 'squeeze' at the same rate.
To Change the range of squeeze, use the Adjust Control.
The Adjust Control on its own controls the lower limit of the cycle. Pressing and holding the Select Button and rotating the Adjust Control will control the upper limit of the cycle. If you attempt to increase the lower limit beyond the higher limit then the upper limit will automatically change, as will the lower limit if you attempt to change the upper limit below the lower limit.
The Ramp Speed setting controls how fast the feel will change. The Time Warp control has no effect in this mode.
